PRO by Déesse PRO | FAQ's
What is the PRO by Déesse PRO LED?
PRO by Déesse PRO is a non-invasive Light Emitting Diode (LED) treatment mask that uses the most clinically proven wavelengths of light to flood the skin in light and stimulate the skin’s natural rejuvenating and healing processes to treat a wide range of conditions.
How many LEDs are on the mask and how many work for each mode?
PRO by Déesse PRO light therapy mask features 770 medical-grade LEDs (light emitting diodes) - with four different wavelengths and six different settings to quickly address your skin's needs.
LEDs Per Light Mode
Blue Light - 154 LEDs
Green Light - 154 LEDs
NIR Light - 154 LEDs
Red Light - 308 LEDs
What do the six treatment modes do?
PRO by Déesse PRO light therapy mask has 6 treatment modes and emits light in the Blue, Green, Red and Near-infrared region of the light spectrum.
Mode 1: 'Rejuvenating' (Red Light 630nm): helps reduce fine lines and wrinkles, boosts collagen and improves elasticity in the skin.
Mode 2: 'Purifying' (Blue Light 415nm): assists in killing bacteria that causes acne.
Mode 3: 'Brightening' (Green Light 520nm): helps alleviate pigmentation.
Mode 4: 'Post Procedure' (Near Infrared 830mm combined with Red Light 630nm and Blue Light 415nm): boosts circulation, increase the skin’s ability to heal and accelerate skin repair.
Mode 5: 'Calming' (Blue Light 415nm & Green Light 520nm): calms the skin and targets inflammation.
Mode 6: 'Rejuvenating Express' (Red Light 630nm): an intensified skin rejuvenation treatment (recommended treatment time is 10 minutes).
Please refer to the operating manual for more information on how to use this product.
How often should I use my PRO by Déesse PRO?
We recommend using your selected treatment mode on the PRO by Déesse PRO mask 2-4 times per week for optimum results.
The number of treatments required for optimum results is subject to a number of factors including indications and severity, age and lifestyle.
Whilst there is no additional benefit of exceeding the treatment time or treatment frequency, there are no risks.
Is the treatment safe?
The PRO by Déesse PRO Light Therapy Mask is safe and effective for all skin types. It does not generate heat or UV wavelengths so cannot damage skin tissue. It is also totally painless and non invasive.
When should the PRO by Déesse PRO not be used?
Do not use the mask:
If you are pregnant, planning on becoming pregnant or breastfeeding
If you are a child under 14 years of age
If you suffer from light induced headaches
If you suffer from any genetic conditions of the eyes
If you suffer from any photosensitive disorder (sensitization to light) of the eye
If you suffer from lupus erythematosus, photosensitive eczema or albinism
If you suffer from any photosensitive disorder (sensitization to light) of the skin
If you are taking any medication that can cause photosensitivity.
Do not share the device with other people.
Is the treatment painful?
The PRO by Déesse PRO Light therapy mask is a relaxing treatment with evidenced wellbeing effects. LED light therapy is painless and non-invasive when used as intended. The treatment does not generate heat but a feeling of natural warmth is common due to the increase in blood circulation.
Do I need to wear eye protection?
No. The PRO by Déesse PRO Light Therapy Mask comes with two medical-grade silicone eye pieces for added comfort during the treatment. This device has been tested to EN62471, which ensures that it complies with current eye safety legislation for LED lamps.
For your added comfort protective eye goggles are included with the PRO by Déesse PRO Light Therapy Mask should you wish to use them.
Will LED light therapy lighten micro-bladed eyebrows?
While the impact of LED technology on micro-bladed eyebrows has not been previously studied, the Express by Déesse PRO Light Therapy Mask does not contain UV so there should not be any affect on the tattoo ink. However, if you are concerned, please speak to your practitioner before proceeding with the LED light treatment.
How should I clean my mask?
Before cleaning ensure that the Mask and controller are unplugged from the Mains outlet. Clean the transparent (face side) of the mask and the rear of the mask with a water-based wipe or damp, clean cloth. Stubborn stains can be removed by wiping gently with 70% alcohol.
How should I treat my skin pre and post-LED treatment?
The PRO by Déesse PRO LED Light Therapy Mask has been proven in trials to greatly the condition of the skin including its hydration, texture and pigmentation. The light improves tissue oxygenation and blood flow and therefore absorption of skin care will be greatly improved. This mask is compatible with most normal skincare routines. To prep, the skin before treatment, gently cleanse the face and ensure there is no residue on the skin as this can act as a barrier to the wavelengths of light. After your skin has dried, place the mask on your face and program your desired treatment. Once the treatment is complete, remove mask and apply desired topical serum, moisturiser and sunscreen.
Does the PRO by Déesse PRO come with a warranty?
Under normal use, this product is guaranteed for 12 months after its original purchase date against manufacturing defects in material or workmanship.
This warranty extends only to the original purchaser. This warranty does not cover damage caused by the following:
- Accident, misuse, abuse or alteration
- Servicing by unauthorised persons
- Connection to incorrect power sources
- Use with unauthorised accessories
Can LED light therapy be used by all skin types?
Yes, LED light therapy is suitable for all skin types and skin phototypes (Fitzpatrick skin types I – VI).
Can I use the PRO by Déesse PRO whilst pregnant?
We would not recommend that you use the the PRO by Déesse PRO mask at any stages of your pregnancy. There have been no studies of light therapy on pregnant women and so the risks are unknown.
Will LED light therapy affect my fillers?
The PRO by Déesse PRO Light Therapy Mask is safe to use with facial fillers. Using the red 630nm wavelength combined with the infrared 830nm wavelength immediately after completing a treatment of fillers can accelerate the healing process by reducing the appearance of bruising, swelling, and redness around the injection site.